P26 middle section pontoon for houseboat

Float width:43cmTotal float length:91cmLength in assembly:(total minus "button")Weight:10.4kgRated capacity :59kgDiameter of bolt holes:0.95cmWall thickness of molded plastic:0.48cm-0.95cmIn

  • Model:

Float width:43cm

Total float length:91cm

Length in assembly:

(total minus "button")

Weight:10.4kg

Rated capacity :59kg

Diameter of bolt holes:0.95cm

Wall thickness of molded plastic:0.48cm-0.95cm

Internal filling Closed-cell

urethane foam

 

 

Our 43cm diameter straight pontoon floats are designed to be used with the nose cones above, other straight floats segments, or all alone. You can have them butted together or separated depending on what you're building. When we're building boats that will be powered, we butt them together with nose cones. When we're building a raft, we space them apart. These floats weigh in at only 10.4kg each and provide 59kg of flotation. They have an indent on one end and a "button" on the other end that is designed to go into the indent on other 17" diameter floats. Our 43cm straight float segments have mounting channels molded into the top made to accept 3.8cm wide rectangular tubing or timber (nominal size 5cm lumber actually measures 1 3.8cm thick). If you are in need of a simple frame solution for these floats, please check out our frame kits and components page. These foam filled floats are available in black, blue, or orange.

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS







Key word:Houseboat pontoon,plastic pontoon for water platform,HDPE plastic pontoon,pontoon for houseboat